Summary

This article will explain the initial setup of the D810 Touch laser and how to use this laser to send measurements into SalesPRO software

Instructions

Setup of Laser

• Turn on your D810 Touch (Bluetooth is auto enabled)  .
• Select the  Windows Start Icon  in the lower left hand corner of your screen, then select Settings     > Devices> Bluetooth       
• Select the Laser from the list of available devices, then hit  Pair 
• You will receive notification when the device is paired to the computer. 
• On the laser,  tap the FUNC button to enter the Functions menu
• Tap the Gear icon on the lower left hand corner of the Laser screen
• Double tap  on the Bluetooth icon 
• Make sure that the selected send type is the first option as shown below

• Hit the gear Bluetooth gear icon on the lower right hand corner of the laser screen
• Make sure that Enter is selected (the second option on that screen) 
• Return to the main screen, and you should have a Blue send arrow in the lower right hand corner of the laser.

• Note:  There is no need to manually connect the laser to the computer once setup is complete.  Each time you turn on the D810 touch, it will automatically connect to your computer, as long as Bluetooth has not been turned off on the PC or laser. 
  

Using the laser in SalesPRO

• From within the software, navigate to your Customers list
• Select the customer for which you are recording measurements
• Click on the Customer Measurements icon
• Click on New

• On the New Customer Measurement window, select the appropriate Room, Item (Window, Door) and Mount 
• Note:  If the drop down menus are for Room, Item and/or Mount, navigate to Maintenance>Lists.  Look for Measurement Items and click on it.  When prompted, select "yes" to download the defaults.  Repeat the process for Measurement Items and Measurement Mounts (requires an internet connection).  
• Place your cursor in the Width field
• Take a measurement and hit the blue arrow on the laser screen 
• Note: if you have multiple measurements, hit the "Clear" button on the laser until the measurement you wish to send is on the bottom display line. 
• Your measurement will be entered and the cursor will advance to the Height field
• Hit the Blue send arrow again
• The Height will be recorded and the cursor will move into the Width field.
• You are ready to take the next measurement and send. 
• When all measurements have been completed, hit the Cancel button to return to the main Customer Measurements window
• The measurements will be shown on this window as a decimal instead of fraction.  This is normal and the measurements will be shown as fractions in Order Entry.
  

For more information on working with customer measurements in order entry, please reference this article: How to use Customer Measurements to build a quote

    Applies To: 

• SalesPRO Software